ConnectData
Jump to navigation
Jump to search
This command establishes data session on the specified port.
The command waits until the data session is established or the expiration of a timeout value.
The timeout value is the greater from the General timeout value or the timeout value specified in the SetDataParameters command.
COMMAND:
| Command | Input Arguments | Returns |
|---|---|---|
| ConnectData | Port index | In case of Error, returns Error Codes |
OUTPUT:
None.
EXAMPLE:
~# ConnectData 0
DATA UP:
IP Address: 10.157.160.161
IP Netmask: 255.255.255.252
IP Default Gateway: 10.157.160.161
IP DNS1: 212.27.40.240
IP DNS2: 212.27.40.241
~# ConnectData 1
TIMEOUT EXPIRED
~# ConnectData 1
DATA NOT SUPPORTED