GsmRegistrationMode
DESCRIPTION=
This command sets/gets GSM auto registration mode, if it is enabled GSM port will automatically try to register to GSM network, otherwise will wait explicit command (SelectGsmOperator) in order to do this. If mode parameter is not specified command will return current auto registration mode.
COMMAND
| Command | Input arguments | Returns |
|---|
OUTPUT
Command status for set command:
"%s\n", command_status (OK | ERROR)
Or actual auto registration mode for get command:
"%s\n", mode (ENABLED | DISABLED)
EXAMPLE
~# GsmRegistrationMode 0 DISABLED
OK
~# GsmRegistrationMode 0
DISABLED
~# GetGsmPortStatus 0
NOT_REGISTERED
~# SelectGsmOperator 0 MANUAL 22001
OK (8287)
~# GetGsmPortStatus 0
REGISTERED (4)
Template:Network