SendAtCommand: Difference between revisions

Revision as of 12:54, 4 June 2024

This places an AT Command to the specified modem port.

COMMAND:

Command	Input Arguments	Returns
SendAtCommand	Port index, ATCommand (*)	Issue an AT Command to the specified module.

(*) Note that the ATCommand must be entered with quotes if the AT Command itself includes double quotes or spaces. See below.

OUTPUT:

Response from the modem to the AT command.

EXAMPLE:

~# SendAtCommand 0, "ATI4"

ATI4

Quectel

RM500Q-AE

Revision: RM500QAEAAR13A03M4G

OK

OR

~# SendAtCommand 0,'AT+QCALLCFG="voice_enable"'

+QCALLCFG: "voice_disable",1

OK

@@ Line 8: / Line 8: @@
 |-
 |SendAtCommand
-|Port index, 'ATCommand' (*)
+|Port index, ATCommand (*)
 |Issue an AT Command to the specified module.
 |}
-(*) Note that the ATCommand must be entered with quotes it the AT Command itself includes quotes.
+(*) Note that the ATCommand must be entered with quotes if the AT Command itself includes double quotes or spaces. See below.
 '''OUTPUT:'''
-Command status for set command:<br>
+Response from the modem to the AT command.
-"%s\n", command_status (OK | ERROR)
-Or actual auto registration mode for get command:<br>
+'''EXAMPLE:'''
-"%s\n", mode (ENABLED | DISABLED)
+~# SendAtCommand 0, "ATI4"
+ATI4
-'''EXAMPLE:'''
+Quectel
+RM500Q-AE
+Revision: RM500QAEAAR13A03M4G
-~# GsmRegistrationMode 0 DISABLED<br>
 OK
-~# GsmRegistrationMode 0<br>
+'''OR'''
-DISABLED
-~# GetGsmPortStatus 0<br>
+~# SendAtCommand 0,'AT+QCALLCFG="voice_enable"'
-NOT_REGISTERED
-~# SelectGsmOperator 0 MANUAL 22001<br>
++QCALLCFG: "voice_disable",1
-OK (8287)
-~# GetGsmPortStatus 0<br>
+OK
-REGISTERED (4)