GSM Release cause / Q.931

GSM release causes for L3 Call Control (GSM 04.08)

Hex	Decimal	Cause
0x1	1	Unallocated or unassigned number
0x2	2	No route to specified transit network (Transit Network Identity)
0x3	3	No route to destination
0x4	4	Send special information tone
0x5	5	Misdialled trunk prefix
0x6	6	Channel unacceptable
0x7	7	Call awarded and being delivered in an established channel
0x8	8	Prefix 0 dialed but not allowed
0x9	9	Prefix 1 dialed but not allowed
0xA	10	Prefix 1 not dialed but required
0xB	11	More digits received than allowed, call is proceeding
0x10	16	Normal call clearing
0x11	17	User busy
0x12	18	No user responding
0x13	19	T.301 expired: – User Alerted, No answer from user
0x15	21	Call rejected
0x16	22	Number changed to number in diagnostic field.
0x17	23	Reverse charging rejected
0x18	24	Call suspended
0x19	25	Call resumed
0x1A	26	Non-selected user clearing
0x1B	27	Destination out of order
0x1C	28	Invalid number format or incomplete address
0x1D	29	EKTS facility rejected by network
0x1E	30	Response to STATUS ENQUIRY
0x1F	31	Normal, unspecified
0x21	33	Circuit out of order
0x22	34	No circuit/channel available
0x23	35	Destination unattainable
0x24	36	Out of order
0x25	37	Degraded service
0x26	38	Network out of order
0x27	39	Transit delay range cannot be achieved
0x28	40	Throughput range cannot be achieved
0x29	41	Temporary failure
0x2A	42	Switching equipment congestion
0x2B	43	Access information discarded
0x2C	44	Requested circuit channel not available
0x2D	45	Preempted
0x2E	46	Precedence call blocked
0x2F	47	Resource unavailable, unspecified
0x31	49	Quality of service unavailable
0x32	50	Requested facility not subscribed
0x33	51	Reverse charging not allowed
0x34	52	Outgoing calls barred
0x35	53	Outgoing calls barred within CUG
0x36	54	Incoming calls barred
0x37	55	Incoming calls barred within CUG
0x38	56	Call waiting not subscribed
0x39	57	Bearer capability not authorized
0x3A	58	Bearer capability not presently available
0x3F	63	Service or option not available, unspecified
0x41	65	Bearer service not implemented
0x42	66	Channel type not implemented
0x43	67	Transit network selection not implemented
0x44	68	Message not implemented
0x45	69	Requested facility not implemented
0x46	70	Only restricted digital information bearer capability is available
0x4F	79	Service or option not implemented, unspecified
0x51	81	Invalid call reference value
0x52	82	Identified channel does not exist
0x53	83	A suspended call exists, but this call identity does not
0x54	84	Call identity in use
0x55	85	No call suspended
0x56	86	Call having the requested call identity has been cleared
0x57	87	Called user not member of CUG
0x58	88	Incompatible destination
0x59	89	Non-existent abbreviated address entry
0x5A	90	Destination address missing, and direct call not subscribed
0x5B	91	Invalid transit network selection (national use)
0x5C	92	Invalid facility parameter 93 Mandatory information element is missing
0x5D	93	Message type non-existent or not implemented
0x5F	95	Invalid message, unspecified
0x60	96	Mandatory information element is missing
0x61	97	Message type non-existent or not implemented
0x62	98	Message not compatible with call state or message type non-existent or not implemented
0x63	99	Information element nonexistent or not implemented
0x64	100	Invalid information element contents
0x65	101	Message not compatible with call state
0x66	102	Recovery on timer expiry
0x67	103	Parameter non-existent or not implemented – passed on
0x6F	111	Protocol error, unspecified
0x7F	127	Internetworking, unspecified
0x80+	128 or higher	Proprietary diagnostic code (not necessarily bad). Typically used to pass proprietary control or maintenance messages between multiplexers.